Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-15
4
(Continued)
• When a bright object is shot in EVS mode or ECS mode (DVW-
790WS/790WSP only) in such a manner that it fills the screen, the
upper edge of the picture may have poor quality because of an inherent
characteristic of CCD. Before using EVS mode, check the shooting
conditions.
• When using the electronic shutter, set FIELD/FRAME to FLD (field
accumulation mode) on the FUNCTION 2/2 page of the setup menu.
4-2-2 Selecting the Shutter Mode and Speed
Use the SHUTTER selector to select a shutter mode or a standard-mode
shutter speed. To set the shutter speed in CLS/ECS mode, with the
SHUTTER switch set to ON and the CLS/ECS mode selected, turn the
rotary encoder.
You can use the SHUTTER page of the setup menu to narrow the range
of choice in advance, or to select in advance whether you use CLS, ECS
or EVS mode.
Setting the shutter mode and standard-mode shutter
speed
1 Follow the procedure described in “Changing the display mode”
(page 4-63) to set the display mode to 2 or 3 from the VF DISP page
of the setup menu.