Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-55
4
4 Shot number indicator
This shows the shot number.
5 Battery state indicator
When an Anton Bauer Intelligent Battery System is used, this shows the
remaining battery capacity numerically.
6 Self-diagnosis indicator
When a fault has been detected in the camcorder, the indication “xxx?”
appears. For example, when a fault is detected in the camera, the
indication “CAM?” appears.
7 16:9 mode recording indicator (DVW-709WS/709WSP/790WS/
790WSP only)
This indicates recording in the 16:9 mode. This indicator is recorded
together with the color bars.
8 Iris setting indicator
1)
This shows the iris setting (the f-stop) of the lens.
9 Remaining tape indicator
This shows the remaining tape recording time (in minutes) of the VTR.
Example of remaining tape indicator
Display Tape time remaining
F-30 Full to 30 minutes
30-25 30 to 25 minutes
25-20 25 to 20 minutes
20-15 20 to 15 minutes
....................................................................................................................................
1) Iris setting indicator
This indicator appears only when you use a lens that has an iris opening display
function.
(Continued)