Filter
Top Products
2-21
Cisco IPICS Server Installation Guide
OL-8155-01
Chapter 2 Installing the Cisco IPICS Server Software
Installing the Cisco Linux Operating System
Figure 2-14 Entering the Static IP Address
f. In the Address field, enter the static IP address.
g. Press Tab to enter information into the Subnet Mask and Default Gateway
Address fields. See Figure 2-14 for an example and the “Obtaining the IP
Addresses for Your Cisco IPICS System” section on page 2-2 for more
information.
h. To continue with the configuration, click OK.
Note Creating a Domain Name Service (DNS) name for the server is
optional. If you want to enter DNS information for eth0, continue to
Step i.
If you do not want to enter DNS information, proceed to Step m.
i. To enter DNS information for this port, click the DNS tab.