Filter
Top Products
Chapter 2 Installing the Cisco IPICS Server Software
Installing Cisco IPICS Server Software
2-46
Cisco IPICS Server Installation Guide
OL-8155-01
Figure 2-34 Cisco Linux Reboot Broadcast Messages
When the system reboots, the connection to the server is disrupted.
Step 15 To close the SSH Tectia Client window, click X.
Manually Installing CSA
If you did not install CSA at the time of the Cisco IPICS server software
installation, you can perform the CSA installation manually at any time. To install
CSA manually, perform the following procedure:
Procedure
Step 1 Log in to the Cisco IPICS server with root privileges.
The Cisco Linux desktop displays.
Step 2 To open a terminal window, click the Red Hat menu and choose System Tools >
Terminal
A terminal window displays.
Step 3 Install the Linux kernel source package by entering the following command:
[root] #rpm -Uv kernel-source-2.4.21-32.0.1.EL.i386.rpm
Step 4 Change directory to the /tmp directory by entering the following command:
[root] #cd /tmp
Step 5 Enter the following command to untar the CSAStandAlone.tar file and place the
extracted copy in the /tmp/CSCOcsa directory: