Filter
Top Products
2-25
Cisco IPICS Server Installation Guide
OL-8155-01
Chapter 2 Installing the Cisco IPICS Server Software
Installing Cisco IPICS Server Software
You can install the Cisco IPICS server software by using the installation CD at the
Cisco IPICS server or you may install it remotely by copying the installer file to
the server.
This installation procedure includes a choice of the following install options:
• Typical—This option installs the Cisco IPICS server software, including
CSA
• Custom—This option allows you to install the Cisco IPICS server software
without CSA
• Upgrade—For information on performing an upgrade of the Cisco IPICS
server software, see Chapter 3, “Upgrading Cisco IPICS”
If you choose not to install CSA during the Cisco IPICS server software
installation, you can install CSA any time after the Cisco IPICS installation is
complete.
This section includes the following topics:
• Installing the Cisco IPICS Server Software at the Server, page 2-25
• Installing Cisco IPICS from a Remote Location, page 2-38
• Manually Installing CSA, page 2-46
Installing the Cisco IPICS Server Software at the Server
To perform the Cisco IPICS server software installation, you must have the
Cisco IPICS installation CD that was included with your product package.
Caution Make sure that you only perform system date changes before you install the
Cisco IPICS software. Cisco IPICS does not support any modification of the
system date in the operating system after the Cisco IPICS software has been
installed. Therefore, it is very important that you check your system date to ensure
that it properly reflects your local date and time. If the system date is not properly
set to your local date and time, you must adjust it before you install the
Cisco IPICS software. If you try to change the system date and time after you
install the software, you will invalidate your license and cause the system to
become inoperable.