Filter
Top Products
18
HP Photosmart R717 User’s Manual
3. Press the buttons to move to the other selections.
4. Repeat steps 2 and 3 until the date and time are set
correctly.
5. Press the button when you have entered the proper
values for the date and time. A confirmation screen
appears, asking if the correct date and time have been
set. If the date and time are correct, press the button
to select Yes.
If the date and time are incorrect, press the button to
highlight No, and then press the button. The Date &
Time screen appears again. Repeat steps 1 through 5 to
set the correct date and time.
TIP: If you need to change the date and time settings later,
you can do this with the Date & Time setting in the Setup
menu (see Date & Time on page 128).
9. Install and Format a Memory Card
(Optional)
Your camera contains internal memory that allows you to
store images and video clips. However, you can use a
memory card (purchased separately) instead to store images
and video clips. For more information about supported
memory cards, see Storage on page 203.
NOTE: When you install a memory card in the camera, all
new images and video clips will be stored on the card. To
use internal memory and view images stored there,
remove the memory card. You can also transfer the
images from the internal memory to the memory card (see
Move Images to Card on page 132).