Filter
Top Products
47
Taking Pictures and Recording Video Clips
Setting the Flash
The Flash button allows you to cycle through the flash
settings on the camera. To change the flash setting, press the
Flash button until the desired setting appears on the Image
Display. The following table describes each of the flash
settings on the camera.
Setting Description
Auto
Flash
The camera measures the light level and uses the flash
if necessary.
Red-Eye The camera measures the light level and uses the flash
with red-eye reduction if necessary (for a description of
red-eye reduction, see Red Eye on page 48).
Flash On
The camera always uses flash. If the light is behind your
subject, you can use this setting to increase the light on
the front of your subject. This is called fill-flash.
Flash Off
The camera will not use flash, no matter the lighting
conditions. Use this setting to capture poorly lit subjects
that are beyond the flash range, or to capture existing-
light scenes. Exposure times may be increased when
using this setting, so you should use a tripod to avoid
blurry pictures from camera shake.
Night
The camera uses the flash with red-eye reduction if
necessary to illuminate objects in the foreground (see
Red Eye on page 48 for a description of red-eye
reduction). The camera then continues to expose as if
the flash had not been used, to gather the light.
Exposure times may be increased when using this
setting; therefore it is recommended that you use a
tripod to avoid camera shake.