Filter
Top Products
269
9
Troubleshooting
Messages Cause
Adding a
Camera Server
Recording
Schedule
Messages List
The host name specified in
“Storage Server Configuration” is
invalid. Check the host name or IP
address.
The port number specified in
“Storage Server Configuration” is
invalid. Specify a number within the
range of 1 and 65535.
An error occurred relating to the
schedule change of ‘schedule
name’ for the camera ‘camera
name’ registered in the Storage
Server ‘Storage Server name’. This
change will not be reflected on the
Storage Server side.
An error occurred relating to the
schedule deletion of ‘schedule
name’ for the camera ‘camera
name’ registered in the Storage
Server ‘Storage Server name’. This
change will not be reflected on the
Storage Server side.
An error occurred when you
obtained the schedule setting
information of the Storage Server
‘Storage Server name’. This change
will not be reflected on the Storage
Server side.
This schedule overlaps with other
schedule. Check the settings and
try again.
For the end time of a schedule, a
time of at least 15 minutes later
than the start time must be
specified. Check the settings and try
again.
Do you want to save the change in
the recording schedule?
An attempt was made to connect to
the Storage Server with an invalid
host name/IP address.
An attempt was made to connect to
the Storage Server with an invalid
port number.
The destination Storage Server was
not found when you attempted to
save the schedule.
The destination Storage Server was
not found when you attempted to
delete the schedule.
The Storage Server in which the
schedule is to be saved was not
found when you attempted to display
the Recording Schedules window or
to switch the Storage Server.
The recording schedules are
overlapping.
An attempt was made to register a
schedule with a shorter period than
15 minutes.
An attempt was made to close the
Normal or Special Day Schedule
screen without saving the change.
COPY