Filter
Top Products
Storage Server Configuration Reference
Setting the Settings Tab
57
3
●
Enter the Storage Server Proxy Address
If the Storage Server needs to access
Camera Servers via proxy server, you
may need to configure proxy settings.
*
See “When using a proxy server” (➝ P. 12).
In the Storage Server Proxy
field, tick the Enable the
following proxy server box.
Enter the Proxy server address
and Port.
For more information on proxy server usage, contact your Camera Server administrator.
2
1
●
Enter Recorded Video Settings
Maximum retained history -
Check the Maximum retained
history option and enter a value
from 1 to 999 and then select
Days or Weeks from the drop-
down menu.
Maximum file size/duration - Check the Maximum file size/duration option, enter
a value, and select MB or Hours. You can enter 32 - 1024 for MB and 1 - 24 for
Hours. If you do not enter a value, 1024 MB or 24 hours is used for the Maximum
file size/duration value.
Low disk space warning level - Enter a percent value.
When the remaining space falls below the specified value, the event will be
displayed and a notification will be e-mailed (➝ P. 53, 71).
Reduce recording frame rate when disk is under high load - When disk is highly
loaded, recording frame rate is temporarily reduced to prevent the recording from
stopped. Refer to Chapter 6 for details. This function is available for JPEG video
recording. It cannot be used for MPEG-4 video recording (VB-C60).
4
3
2
1
COPY