Filter
Top Products
89
4
Register Camera Server and Set Recording Schedule
Add Storage Server
Edit Storage Server
In the Storage and Camera Server Summary, select the Storage Servers tab.
A list of Storage Servers which have already been added is displayed.
Double-click the Storage Server in
the list.
Alternatively, select the Storage
Server and click Edit.
This will bring up the Edit Storage
Server dialog.
Change the settings and click OK.
3
2
1
To save changes, click
Save Changes at the
bottom right-hand corner
of the Camera Summary
window.
Click Discard Changes to
cancel any changes you
have made.
4
Do not add the same Storage Server more than once.
If you add a Storage Server with a different configuration
(such as one managed by another Master Storage Server),
your original Locations and Zones will be invalid.
You need to change Windows settings of a storage server to
be added before if you are using Windows XP SP2 or Windows
Server 2003. Refer to “Notes on Operating Environment” (➝ P.
24~27).
Do not change the port number.
N
o
t
e
You should change the setting of Storage Server in case of the
IP address of Storage Server has been changed.
The Master Storage Server cannot be edited.
N
o
t
e
COPY