Filter
Top Products
Taking Pictures
2-31
R4C4410
Rev. C
A5 size PICTURES.FM
2/11/00 Pass 3
R
Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi
2
Turning the camera back on
When the dial switch in set to an orange icon, you can
turn the camera back on by pressing the shutter
button, or turning the dial switch off, then on again.
When the dial switch is set to or , you can turn
the camera back on by pressing any button on the back
of the camera, or by turning the dial switch off, then
on again.
Setting the LCD monitor’s brightness
Follow the steps below to change the LCD monitor’s
brightness level.
1. Turn the dial switch to .
2. Press the
ISO
button.
3. Press the
+
or
-
button to increase or decrease the
brightness level.
Adjusting the speaker volume
You can adjust the volume of the built-in speaker.
Follow these steps.
1. Turn the dial switch to .
2. Press the
ISO
button.
3. Press
Volume
to adjust the speaker volume:
Volume Hi
or
Low
appears on the monitor.
4. Press
BACK
to return to the previous screen.
Setting the beep
You can have the camera beep whenever you press
any of its buttons, only when you use the shutter
button, or never. Follow these steps to change the beep
setting.
1. Turn the dial switch to .
2. Press the
ISO
button. Then press the
ISO
button to
select
Always
,
Shutter,
or
Never
.
3. Press
BACK
to return to the previous screen.