Filter
Top Products
120
121
Hasselblad H1D
Hasselblad H1D
Fill ash: normal ash (-1.7EV), autofocus (single), single drive, autoexposure, average me-
tering.
Access them by clicking on the PROFILES button when in the standard screen. e prole
screen appears and the required prole selected by scrolling the list and loaded to implement
the saved settings.
! All user proles can be restored to factory default settings by holding down the MENU
and DRIVE buttons with the battery attached
Making a prole
1) Activate the camera and go through the various settings ( for example, autofocus, aper-
ture priority, ll ash exposure compensation, etc.) you require for the particular purpose
and save them as you go.
2) When all the required settings have been made, click the PROFILES button on the grip
once and the prole screen will appear.
3) Use either the front or rear control wheel to scroll through the list of proles. Pick a prole
name you want to change (except Standard), press SAVE.
4) The Prole name screen is then displayed where you can rename the prole to what suits
you (see section Imprint / Text 4.2.2 further on in this manual for procedure details).
5) Press SAVE to keep the combination of settings with the new name.
To use a prole from the standard screen, press the PROFILES button to reach the proles
screen again. Scroll down the list to the prole you want and then press the Load (AF) but-
ton. All the saved settings will then be automatically implemented.