Filter
Top Products
64
65
Hasselblad H1D
Hasselblad H1D
Untethered use (on location)
1. Connect the H1D to the Image Bank with the link cable.
2. Attach the battery to the Image Bank (see ‘Attaching/Detaching the
Battery’ for details).
3. If required, attach a studio-ash (strobe lighting) system to your
camera body for synchronizing ash and exposure.
4. For convenience, you can attach the Image Bank to your belt or pocket
using the belt clip on the rear of the device.
5. Press the Image Bank’s On/O button and wait until the unit is ready
(status indicator = green).
Care and maintenance
! Always replace the protective CCD cover if the sensor unit is
removed from the camera body.
! Do not touch the exposed CCD or infrared lter with your
ngers.
! Keep all foreign objects out of the CCD opening.
! Store the camera and Image Bank away from moisture and
excessive heat - see ‘Technical Specications’ for operational-
and storage requirements.