Filter
Top Products
92
93
Hasselblad H1D
A
B
C
D
E
Hasselblad H1D
! Ensure you press on the centre of the button, not on the lever.
! You cannot remove a magazine if the darkslide is not closed.
! If the lm holder is inadvertently removed mid-lm, then exposed frames will naturally
be lost due to light fogging. However, if the lm holder is quickly re-inserted, the lm will
automatically be advanced by three frames to position fresh unexposed lm. The lm
counter will also correspondingly add on three frames to the original number recorded
before the lm holder was removed.
Magazine settings
Press the
button repeatedly to successively access:
A. Film speed (ISO / Bar Code)
B. Film length (120/220/ Number of frames)
C. Data (on/o)
D. Frame counter (count down / count up)
Film speed setting / Barcode A
e lm speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a
Barcode (only some lms have this feature). is is the default setting.
! Film settings (ISO / lm length) are automatic only if the magazine is set at Barcode
automatic. That is, a barcoded lm cannot override a manual lm speed setting but a
manual setting can override the lm speed of a barcoded lm.