Hasselblad H1D Digital Camera User Manual


  Open as PDF
of 184
 
76
77
Hasselblad H1D
1
2
Hasselblad H1D
Parts & Components
A. Rubber eye cup
B. Hot shoe
C. Eyesight adjustment wheel
D. Exposure compensation button
E. Exposure method / mode button
F. Integral ash unit
G. Flash unit button
H. Viewnder release button
Attaching and removing the viewnder
While holding the viewnder at a slight angle and resting it on the top of the camera, slide
the viewnder forward until the front locating pin is in position in the recess in the front
edge of the viewnder screen aperture on camera body. Press the rear part of the viewnder
rmly downwards until it clicks into place.
Ensure that both sides of the viewnder are seated correctly and that it has been rmly
attached. Failure to do so could cause an intermittent malfunction if the databus interface
connections between the viewnder and camera body are not positively secured.
To remove, grasp the viewnder in the right hand and while depressing the viewnder release
button, li the rear of the viewnder up and away from the camera body.
 previous next