Filter
Top Products
148
149
Hasselblad H1D
Hasselblad H1D
1) Turn the front and
rear control wheels
until the X symbol is
highlighted.
On the text row,
the text cursor is
automatically placed
to the right of the
character that is to be
changed.
2) Press Sel. (AF but-
ton) and the charac-
ter will be erased.
3) Repeated pressing
of Sel. will progres-
sively erase all the
characters in the line.
1) After erasing
unwanted text, turn
the front and rear
control wheels until
the desired character
is highlighted (in this
case the copyright sym-
bol) and press Sel.
2) Choose the next
character in the same
manner (in this case a
space) and press Sel.
3) The capital letter ‘J’
has been highlighted
and saved in this
example.
4) Repeat the proce-
dure until all the letters
and characters you
want appear. As you
progress with more
characters, those to
the left will disap-
pear from the screen
so that you can see
what you are adding.
Don’t forget there
is a maximum of 37
characters.
If you make a mistake
you must remove
each character singly
(see Removing text)
until you reach where
you want to make
a change and then
return to the ‘Adding
text’ procedure again.
5) This example
shows a completed
15 character text line
with symbols, spaces,
large and small let-
ters.
Removing text Adding text / Changing prole name