Filter
Top Products
90
91
Hasselblad H1D
Hasselblad H1D
insert the battery incorrectly, the lm magazine will not be damaged though it will not func-
tion. Try to avoid touching the surface of the battery with your bare ngers as sweat residue
can decrease the electrical conductivity of the battery casing and might cause corrosion.
Aer battery replacement, the magazine’s parameters return to the default settings (Barcode,
120, Data-on, Count up).
Attaching and removing the magazine
You cannot remove a magazine from the camera body if the magazine darkslide is not in
place, (when the magazine darkslide indicator on the magazine shows white). Neither can
you withdraw the magazine darkslide when the magazine is not attached to the camera. Both
these restrictions therefore prevent accidental lm loss caused by fogging.
Attachment
Position the magazine retention groove onto the magazine support on the camera body
ensuring that they are correctly positioned. Swing the magazine towards the camera body
and rmly press into place with a click. If there is resistance, the magazine retaining catch
on the camera has probably been inadvertently released. In that case, push the release button
again to reset the catch.
You can attach and remove the magazine with or without the lm holder in place. If you just
want to change to a new lm, you can remove and reload the lm holder without having to
remove the whole magazine.
Removal
Ensure that the darkslide indicator on the magazine shows red (signifying that the darkslide
is closed). Firstly press slightly on the centre of the magazine release button and twist it
clockwise until it stops. en press the button rmly inwards towards the camera body (see
diag.) to nally release the magazine.
2
1