Filter
Top Products
98
99
Hasselblad H1D
Hasselblad H1D
key clockwise 90˚ to lock the lm holder in place and fold the
key back into its stored position. You might nd that increased
pressure on the left hand side of the lm holder will more easily
ensure a positive and correct positioning in the magazine.
6) If the camera is active or in standby mode the lm will be wound
automatically by the camera to position the rst frame (this
function can be changed in ‘Custom options’ so that the lm is
advanced only when the shutter release button is pressed the
rst time).
Film wind o
When the last frame has been exposed, the lm will automatically
be wound o. However, to wind o a lm sooner, press the lm wind
o button (on the camera). Use a ballpoint pen or similar to activate
it. You must also conrm the message on the grip LCD before the
lm rewinds.
Unloading a lm
To remove a lm, remove the lm holder in the same manner as
when loading a lm. Grip the exposed roll of lm rmly and remove.
Ensure the paper backing is wound tightly and that it is sealed with
the band properly (the band may need to be moistened to activate the
adhesive depending on type). Store exposed lms away from strong
light sources and contact with sharp objects. Move the remaining
empty spool to the take-up spool compartment.