Filter
Top Products
30 Printing Without a Computer
■ PhotoEnhance adjusts the brightness, contrast, and saturation of your photos.
■ None if you don’t want to use P.I.M., Exif, or PhotoEnhance.
4. To boost the appearance of small images taken from mobile phones and low-resolution
PDAs, press the button to choose
Small Image Enhancer, then highlight On and
press
OK. (Make sure to turn this option off when printing most photos, or your printer
will print slowly.)
Note: These settings are saved when you turn off the printer or choose a
different set of photos, so remember to turn off the settings when you’re done.
To make manual adjustments in addition to the automatic ones, follow the steps in the next
section.
Manually Adjusting Your Photos
1. Press the button to highlight More Options, then press OK.
2. Highlight
Contrast, Brightness, Saturation, Sharpness, or Filter, then press OK.
3. Choose your setting, then press
OK.
Note: These settings are saved when you turn off the printer or choose a
different set of photos, so remember to turn off the settings when you’re done.
Pbasics.book Page 30 Tuesday, June 1, 2004 1:31 PM