Filter
Top Products
Diagnosing Problems 99
Close the CD/DVD guide. Close the CD/DVD guide, then
press the ( maintenance
button.
If the CD/DVD tray is inserted,
remove the CD/DVD tray, then
close the CD/DVD guide.
The CD/DVD tray is not set correctly. Reload the tray,
then press the maintenance button.
Reload the CD/DVD tray, then
press the ( maintenance
button.
The inserted card cannot be used with this printer. Use a compatible and formatted
memory card. (See page 19.)
Bluetooth Photo Print Adapter error. Disconnect the
Adapter from the printer, then reconnect it.
Disconnect the adapter, then
reconnect to the printer.
System error. Simultaneously press and hold the Power
and Stop button for 7 seconds to turn off the printer.
Turn the printer off, and, after a
few seconds, turn it on again. If
the error is not cleared, contact
your dealer.
Ink icon blinks The printer is low on ink. Obtain
a replacement ink cartridge.
Communicating with computer. Please wait. Start printing from the LCD
panel after printing from the
computer is completed.
The connected device cannot be used. Connect an external storage
device that is compatible with
the printer. (See page 20.)
Display Solution
Pbasics.book Page 99 Tuesday, June 1, 2004 1:31 PM