Filter
Top Products
119
Menu Organization and Operation
Chapter 5 Menu Displays and Detailed Settings
MAINTENANCE menu
MAINTENANCE menu
No. Page Item Settings Default USER
menu
page
Description File
01 AUDIO-1 AU REF LEVEL –20 / –18 /
–16 / –12 dB
–20 dB – Sets the output level of the 1 kHz
test signal.
A
AU AGC SPEC –6 / –9 / –12 /
–15 / –17 dB
–6 dB AGC characteristic (saturation
level) setting
AU LIMITER MODE OFF / –6 /
–9 / –12 /
–15 / –17 dB
OFF During manual adjustment of audio
input levels, selects the limitter
characteristics (saturation level) for
large input signals.
REAR MIC REF –60 / –50 /
–40 dB
–60 dB Selects the reference input level
when the AUDIO IN CH1 switch or
AUDIO IN CH2 switch is set to
MIC.
FRONT MIC SELECT MONO /
STEREO
STEREO Input mode selection for front
microphone
AU CH12 AGC MODE MONO Selects whether to carry out
automatic adjustment of the input
levels of analog audio signals
recorded on channels 1 and 2
independently for the two channels
or to carry it out in stereo mode.
AU CH34 AGC MODE OFF /
MONO /
STEREO
Selects whether to carry out
automatic adjustment of the input
levels of analog audio signals
recorded on channels 3 and 4
independently for the two
channels, to carry it out in stereo
mode, or not at all.
AU SG (1KHz) ON / OFF /
AUTO
OFF In the color bar mode, selects
whether to output a 1 kHz test
signal.
ON: Output.
OFF: Do not output.
AUTO: Output the test signal only
when the AUDIO SELECT
(CH-1) switch is set to AUTO.