Filter
Top Products
131
Menu Organization and Operation
Chapter 5 Menu Displays and Detailed Settings
09 BLACK
SHADING
BLACK SHADING CH
SEL
R / G / B R – Selects the channel adjusted with
this menu. If TEST is selected with
the output signal selector switch
(button) of a remote control unit,
the setting matches that of VIDEO
OUT SEL.
A
VIDEO OUT SEL VBS / R / G /
B
VBS Selects the signal output from the
VIDEO OUT connector.
R BLK H SAW (–99 to +99) 0 H SAW black shading correction
R BLK H PARA H PARA black shading correction
R BLK V SAW V SAW black shading correction
R BLK V PARA V PARA black shading correction
BLACK SAW/PARA ON / OFF ON Turns black shading SAW/PARA
correction on or off.
MASTER BLACK (–99 to +99) 0 Adjusts the master black level.
MASTER GAIN(TMP) –3 / 0 / 3 / 6 /
9 / 12 / 18 / 24
/ 30 / 36 / 42
dB
0dB Temporarily adjusts the master
gain value.
10 DCC DCC D RANGE 200% to
460%
460% – Sets the dynamic range applied
when DCC is on.
A
DCC POINT (–99 to +99) 00 Adjusts the DCC minimum knee
point.
DCC GAIN Adjusts the gain vs. the DCC
detected value.
DCC DELAY TIME Adjusts DCC reaction speed.
11 ND COMP ND OFFSET ADJUST ON / OFF ON – Turns ND offset adjustment mode
on or off. This mode is for adjusting
the offset for color correction by the
ND filter.
A
CLEAR ND OFFSET – EXEC Clears the ND filter color correction
offset.
ADVANCED menu
No. Page Item Settings Default
setting
USER
menu
page
Description File