Sony PDW-F355L Camcorder User Manual


 
80
Thumbnail Search
Chapter 3 Recording and Playback
The CLIP menu appears (see page 96).
2
Use the SEL/SET button or MENU knob to select
“SET INDEX PICTURE”, and then press the button/
konb.
This switches to the screen for selecting a clip for
changing the index frame.
3
Select the desired thumbnail, and press the SEL/SET
button or MENU knob.
The frame from the clip that is currently specified as
the thumbnail is displayed. In this state, you can use
playback or search.
4
Using playback or search, find the new index frame.
You can also turn the MENU knob for a jog operation.
5
Press the SEL/SET button or MENU knob.
This sets the selected scene as the index frame, and
returns to the thumbnail screen.
When the thumbnail is other than the first frame, this
is shown as follows.
If you select a marked thumbnail, and press the SEL/SET
button or MENU knob, this does not cue up to the
thumbnail position. Cuing up is always to the first frame of
the clip.
To cancel setting the index frame, hold down the SHIFT
button and press the SEL/SET button down (CLIP
MENU).
Cuing Up a Frame by Searching for
an Essence Mark
Proceed as follows.
1
With the SUB CLIP indicator off, hold down the
SHIFT button and press the THUMBNAIL button.
The essence mark selection screen appears.
Essence marks not recorded on the disc appear in gray.
To escape from the essence mark selection screen to
the previous screen
Press the RESET button on the right side of the LCD
monitor.
2
Use the SEL/SET button or the MENU knob to select
the desired essence mark.
3
Press the SEL/SET button or the MENU knob.
Thumbnails of the frames including the selected
essence mark appear.
Note
Mark indicating that the
thumbnail is not the first frame
CH-1
MIX
CH-2
CH-3
PRESET
AUTO
FRONT
WIRELESS
REAR
CH-1
MANUAL
AUDIO SELECT
AUDIO IN
F-RUN
REGEN
ON
OFF
SET
ON
OFF
CLOCK
F
W
R
F
W
R
R-RUN
MONITOR
FRONT MIC
LOW CUT
VIDEO OUT
CHARACTER
AUDIO LEVEL
THUMBNAIL SUB CLIP
MIX
CH-4
CH-1/2
CH-3/4
SHIFT
CLIP MENU
SEL/SET
010010
ESSENCE
MARK
CH-2
CH-3
CH-4
LITHIUM BATT
2-5
1
5
2-5