Filter
Top Products
17
Location and Function of Parts
Chapter 1 Overview
a Video format
Indicates the format of video being currently played back
or recorded.
HD HQ: HQ (high quality) mode in the MPEG HD video
format
HD SP: SP (standard play) mode in the MPEG HD video
format
HD LP: LP (long play) mode in the MPEG HD video
format
DVCAM: DVCAM format
b Playback indicator
Appears during playback.
c Camera scan mode indicator
Indicates the camera scan mode of video being currently
played back or recorded.
• If NTSC AREA is selected
1)
60I: 59.94 fields per second, interlace scan mode
30P: 29.97 frames per second, progressive scan mode
23.98P: 23.98 frames per second, progressive scan mode
(converted to 60i at 2-3 pulldown)
• If PAL AREA is selected
1)
50I: 50 fields per second, interlace scan mode
25P: 25 frames per second, progressive scan mode
1) Selected by COUNTRY setting on the FORMAT page of the
OPERATION menu .
There may be no indication displayed when this unit
cannot identify the camera scan mode, for example, when
playing back a disc recorded with other equipment.
d Non-drop-frame mode indicator
Appears when non-drop-frame timecode is selected.
e External synchronization indicator
Appears when the internal timecode generator is locked to
an external signal input to the TC IN (timecode input)
connector.
f Audio channel display
Shows the audio channel mode during recording or
playback.
2ch: two-channel mode (only when the MPEG HD format
is selected)
4ch: four-channel mode
g Hold indicator
Appears when the internal timecode generator is stopped.
h Audio level indicators
Indicates the audio recording or playback levels of
channels 1 to 4.
i Lithium battery low voltage warning
Appears when the voltage of the internal lithium backup
battery (CR2032) is low. If this indication appears, replace
the lithium battery immediately (see page 30).
j Remaining battery capacity indicator
k Remaining disc capacity indicator
l Remaining clips display
Displays the remaining number of clips that can be
recorded. The display flashes once per second when the
number of remaining clips is less than 10. It flashes 4 times
per second when the number of remaining clips is 0.
Note
Indication Battery voltage
BP-L90A/L60S/
L80S
Other
batteries
BATT E [ ■■■■■■■ ] F 15.5 V or more 17.0 V or more
BATT E [ ■■■■■■ ] F 15.1 to 15.5 V 16.0 to 17.0 V
BATT E [ ■■■■■ ] F 14.6 to 15.1 V 15.0 to 16.0 V
BATT E [ ■■■■ ] F 13.8 to 14.6 V 14.0 to 15.0 V
BATT E [ ■■■ ] F 12.9 to 13.8 V 13.0 to 14.0 V
BATT E [ ■■ ] F 12.0 to 12.9 V 12.0 to 13.0 V
BATT E [ ■ ] F 10.8 to 12.0 V 11.0 to 12.0 V
BATT E [ ] F 10.8 V or less 11.0 V or less
Indication Battery voltage
BP-GL95/GL65/IL75/
M100, Anton Bauer
Battery System
BATT E [ ■■■■■■■ ] F 80 to 100%
BATT E [ ■■■■■■■ ] 70%
BATT E [ ■■■■■■ ] 60%
BATT E [ ■■■■■ ] 50%
BATT E [ ■■■■ ] 40%
BATT E [ ■■■ ] 30%
BATT E [ ■■ ] 20%
BATT E [ ■ ] 10%
BATT E [ ] 0%
Indication Remaining recording
time
DISC E [ ■■■■■■■ ] B More than 30 minutes
DISC E [ ■■■■■■ ] B 25 to 30 minutes
DISC E [ ■■■■■ ] B 20 to 25 minutes
DISC E [ ■■■■ ] B 15 to 20 minutes
DISC E [ ■■■ ] B 10 to 15 minutes
DISC E [ ■■ ] B
5 to 10 minutes
DISC E [ ■ ] B 2 to 5 minutes
DISC E [ ■ ] B (flashing) 0 to 2 minutes
DISC E [ ] B (flashing) 0 minutes