Filter
Top Products
29
Attaching and Replacing the Lithium Battery
Chapter
Chapter 2 Preparations
2
Preparations
Attaching and Replacing
the Lithium Battery
This camcorder uses a lithium battery to retain stored data.
When using the camcorder for the first time, be sure to
attach the supplied lithium battery (CR2032). The
camcorder will not operate correctly without this lithium
battery. After attaching the lithium battery, set the date and
time of the internal clock (see “Setting the Date and Time
of the Internal Clock” on page 33).
Use CR2032 lithium batteries only. Other types of lithium
battery may come loose when the camcorder is subjected
to vibrations. If you have difficulty finding CR2032
lithium batteries, contact your Sony dealer.
1
Set the POWER switch to OFF.
2
Press down the catch at the top of the battery cover and
open the cover.
3
Take out the lithium battery.
4
Reverse step 3 to insert a replacement lithium battery.
Make sure that the + symbol on the battery is facing
you.
5
Close the battery cover.
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s
instructions.
Bei der Entsorgung leerer Batterien sind die Anweisungen
des Herstellers zu befolgen.
Service life of the lithium battery
When the lithium battery’s voltage falls, the lithium
battery low voltage warning appears on the LCD monitor
(see page 16). If this warning appears, replace the lithium
battery (CR2032) within three or four days.
The lithium battery has an average service life of about one
year.
Note
LITHIUM BATT
2
1
Catch
Press down
and pull
forward.
Battery cover
WARNING
CAUTION
Press down and pull out
toward you.