Filter
Top Products
75
Recording – Advanced Operations
Chapter 3 Recording and Playback
A list of up to 20 title prefixes appears.
When no list of title prefixes has been transferred to
the internal memory of this unit, only the initial value
“TITLE” appears.
2
Select the desired title prefix from the list, and then
press the MENU knob.
The CLIP TITLE page appears again, and the selected
prefix appears in the PREFIX field.
Recording with the Clip Continuous
Rec Function
Normally, a clip is generated as an independent file every
time recording starts and stops. The Clip Continuous Rec
function allows you to continue recording to the same clip
until the function is turned off, regardless of how many
times recording starts and stops. This is convenient if you
want to avoid generating a large number of short clips, or
if you want to record without worrying about the limit on
the number of clips (maximum 300). A REC START
essence mark is recorded whenever recording starts, which
makes it easy to find the recording start points.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Set CLIP CONT REC on the SPECIAL EFFECTS
page of the OPERATION menu to ON.
For details on menu operations, see “Basic Menu
Operations” (page 132).
2
Select CLIP CONT REC, and press the MENU knob.
3
Press the MENU knob.
The VDR operation indicator in the viewfinder
changes to “CONT”, and the Clip Continuous Rec
function is enabled.
The Clip Continuous Rec ON/OFF function can be
assigned to the ASSIGN 1/2/3/4 switches.
See “Assigning Functions to ASSIGN Switches” (page
143) for more information about the ASSIGN switches.
The following recording modes cannot be enabled when
this function is enabled.
• Slow & quick function
• Interval Rec function
• Picture Cache function
To stop the function
Do one of the following to stop the Continuous Rec
function. (A new clip will be generated the next time you
start recording.)
• Perform a clip operation (lock or delete a clip)
• Make a network or FAM connection
• Eject the disc
• Change the recording format. (The unit responds as
follows. If the FIND MODE on the ESSENCE MARK
page of the MAINTENANCE menu is set to CLIP, the
unit moves from the current position to the next clip. If
it is set to R.ST, the unit moves from the current position
to the next REC START essence mark.)
• Power the unit off
To turn the function off
Set CLIP CONT REC on the SPECIAL EFFECTS page of
the OPERATION menu to OFF.
Viewing Camera Video during
Playback (Live & Play Function)
By carrying out the following procedure to enable this
function before starting playback, you can view camera
video (live video) during playback from the disc. This is a
convenient way to frame the next shot and adjust the
exposure and focus while viewing recorded video and
playback video.
• The FREEZE MIX function (see page 144) cannot be
used when the LIVE & PLAY function is on.
• The playback video only is output to the LCD display
and video output during playback with the LIVE &
PLAY function enabled. Text information, markers, and
zebra signals are not output.
Note
?P00 TITLE PREFIX ESC
001: Tennis
002: Basketball
003: Skiing_1
004: Skiing_2
005: Athletics
006: Aquatics
007: Cycling
008: Softball
009: Fencing
010: Sailing
002 SPECIAL EFFECTS TOP
SLOW&QUICK : OFF
FRAME RATE : 30P
CLIP CONT REC : ON
INTERVAL REC : ON
INTERVAL TIME : 1SEC
NUMBER OF FRAME : 1F
NUMBER OF TIMES : CONT
PRE-LIGHTING : OFF
PICTURE CACHE : OFF
CACHE REC TIME : 8-10s
Note
Notes