Filter
Top Products
137
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Chapter 5 Menu Displays and Detailed Settings
3
Select YES, and press the MENU knob.
The settings for all items in the USER Menu are reset
to the standard settings.
Resetting USER Menu Settings to
the Factory Default Settings
You can return all settings in the USER menu to the
factory default settings.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the USER FILE page of the FILE menu, and
press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Press the MENU knob, then select CUSTOMIZE
RESET, and press the MENU knob.
The message “RESET DATA OK? YES b NO”
appears.
3
Select YES, and press the MENU knob.
The settings for all items in the USER menu are reset
to the factory default settings.
Setting the Status Display
on the Viewfinder Screen
and the LCD Monitor
This section explains the menu settings for the display of
the viewfinder screen. These settings are also used for the
display of the LCD monitor in the same way.
Selecting the Display Items
To select the items to be displayed on the viewfinder
screen (with the viewfinder DISPLAY switch set to ON)
and the LCD monitor, use the VF DISP 1 and VF DISP 2
pages of the OPERATION menu.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the VF DISP 1 or VF DISP 2 page of the
OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Select the desired setting item, and press the MENU
knob.
On the VF DISP 1 and VF DISP 2 pages, you can
select any of the following items to turn its display on
or off.
VF DISP 1 page
1) This item may not appear depending on the mounted lens.
TOP?F01 USER FILE
PRESET OK? YES NO
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
CUSTOMIZE RESET : EXEC
TOP?F01 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
CUSTOMIZE RESET : EXEC
TOP?F01 USER FILE
RESET DATA OK? YES NO
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
CUSTOMIZE RESET : EXEC
Item Description
DISP REC
FORMAT
Displays the recording format.
DISP BIT RATE Indication of HQ, SP or LP
recording.
DISP SYSTEM System frequency.
DISP FRAME
RATE
Indication of frame rate during slow
& quick motion recording.
DISP 16:9 Aspect ratio indication when
recording SD signals.
DISP ZOOM
1)
Zoom position indication.
DISP FOCUS
1)
Focus setting.
DISP BATT
REMAIN
2)
Displays the battery voltage or
battery remaining capacity.
DISP REC/PLAY REC, PLAY, F REV, and F FWD
indications.
DISP TIME CODE Displays the timecode.