Filter
Top Products
Disc Operations
138
Chapter 5 Operations in GUI Screens
See page 116 for more information about GUI screen
operations.
1 Display the Disc Menu.
2 Select Format Disc, and then press the
SET/S.SEL button or the MENU knob.
A message appears asking you to confirm the
format.
3 Select OK, and then press the SET/
S.SEL button or the MENU knob.
To cancel the format
Select Cancel, and then press the SET/S.SEL
button or the MENU knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press
the SET/S.SEL button or the MENU knob.
To exit the formatting screen
Press the SET/S.SEL button or the MENU
knob with Exit selected.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting
in the loss of recorded data, you can disable the
Format Disc command.
See page 116 for more information about GUI
screen operations.
1 Display the Disc Menu.
2 Select “Settings”, and then press the
SET/S.SEL button or the MENU knob.
3 Select ‘Disable “Format Disc”’, and
then press the SET/S.SEL button or the
MENU knob.
4 Select “Disable”, and then press the
SET/S.SEL button or the MENU knob.
By connecting this unit and a computer over a
network, you can display disc properties and clip
properties in a web browser installed on the
computer (Web Thumbnail function).
The Clip Properties page also allows you to
download high-resolution clip data, proxy AV
data, and metadata from this unit and to save that
data on your computer.
To display the unit’s XDCAM web pages
1 Connect this unit and a computer to a
network (see page 232).
2 Start the browser on the computer, and
enter “http://” +
IP_address_of_this_unit + “/” in the
address bar of the browser, and then
press the Enter key.
For example, if the IP address of this unit is
“192.168.001.010”, enter “http://
192.168.1.10/”.
If the connection succeeds, you will be
prompted to enter a user name and a
password.
3 Enter your user name and password,
and then press the Enter key.
The user name and password are set to the
following when the unit is shipped from the
factory.
• User name: admin
• Password: Model name (“pdw-f800” or
“pdw-700”)
After the user name and password are
verified, an XDCAM web page appears.
Formatting discs
Cancel
OK
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
Displaying disc and clip
properties in a web browser