Filter
Top Products
Menu List
182
Chapter 6 Menu Displays and Detailed Settings
13/13 CAM
CONFIG 2
TEST SAW
SELECT
SAW/REC Selects the test signal.
COLOR BAR
SELECT
ARIB/100%/
75%/SMPTE
Selects the HD color bar type.
USER & ALL
ONLY
OFF/ON Show only USER menu in the top menu.
RM COMMON
MEMORY
OFF/ON Selects whether or not to share settings for when a
remote control unit is connected and when the unit
is used alone.
RM REC START RM/CAM/
PARA
When an RM remote control unit is connected,
selects which recording start/stop buttons are
enabled.
RM: remote control unit
CAM: camcorder
PARA: both
SHT DISP MODE SEC/DEG Selects shutter speed display (seconds or degrees).
RM F NO
DISPLAY
CTRL/RET Selects the method used to display IRIS F values
on the MSU-900 or another remote control unit.
CTRL: Display on the basis of control value from
the camera (normal display method).
RET: Display on the basis of position information
from the lens (same method as when AUTO
IRIS is enabled).
FAN CONTROL AUTO/R.MIN/
MIN
Specifies the control method for the cooling fan.
(This setting is retained even when the unit is
powered off.)
AUTO: Control the rotation of the cooling fan
automatically.
R.MIN: Rotate the cooling fan at low speed
during recording only (and stop the rotation
when this unit is used in an environment so
cool that temperatures inside the unit do not
rise).
MIN: Rotate the cooling fan at low speed (and
stop the rotation when this unit is used in an
environment so cool that temperatures inside
the unit do not rise).
Note
Regardless of this setting, the cooling fan rotates
at high speed if temperatures inside the unit rise to
a temperature near the alarm level.
FOCUS MAG SW MTRY/ALT Selects the method that activates the FOCUS
MAG function when the function is assigned to an
ASSIGN switch.
MTRY: The function is on as long as the switch is
held down.
ALT: Each press of the switch toggles between on
and off. (The function goes off automatically
five seconds after it is turned on.)
No. Page Item Settings Description