Filter
Top Products
Menu List
187
Chapter 6 Menu Displays and Detailed Settings
a) The setting of this item is overridden by the setting of
Other BEFORE END when TYPE DETECTION in
the BATTERY 2 page is set to “OTHER”.
b)The setting of this item is overridden by the setting of
Other END when TYPE DETECTION in the
BATTERY 2 page is set to “OTHER”.
c) When TYPE DETECTION in the BATTERY 2 page
is set to “AUTO”, any batteries other than Sony BP-
series batteries and Anton Bauer intelligent battery
systems are classified as “Others”.
d)Flashes once per second when the battery status is
“BEFORE END”, and flashes 4 times per second
when the battery status is “END”.
e) A setting for this item is required when AU CH34
AGC MODE in the AUDIO-2 page is set to OFF.
f) A setting for this item is required when the DWR-
S01D Digital Wireless Receiver is installed.
g)SDI OUT 1 SELECT or SDI OUT 2 SELECT in the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
24/– SHUTTER
SELECT
SHUTTER
SELECT
SECOND/
DEGREE
Selects the shutter speed display unit.
SECOND: Second units
DEGREE: Degree units (shutter opening angle)
See page 67 for more information about degree
unit settings.
ADD
(only when
SHUTTER
SELECT is set to
“DEGREE”)
360.0 to 180.0 to
4.5 (upper limit
of shutter angle
degrees)
Registers a shutter degree setting in an empty
number from 1 to 6 (this item is disabled if no
number is empty).
DEL
(only when
SHUTTER
SELECT is set to
“DEGREE”)
– Deletes the setting assigned to a number from 1 to
6 (numbers with no settings assigned cannot be
selected).
1 to 6
(only when
SHUTTER
SELECT is set to
“DEGREE”)
Display only Displays the shutter opening angle assigned to
number 1 to 6, and the corresponding speed in
second units, as calculated on the basis of the
selected frame rate.This differs as follows,
depending on the setting of SYSTEM
FREQUENCY.
59.94i, 29.97P: 1: 216.0, 2: 180.0, 3: 90.0, 4:
45.0, 5: 22.5, 6: 11.2
50i, 25P: 1: 180.0, 2: 150.0, 3: 90.0, 4: 45.0, 5:
22.5, 6: 11.2
23.98P: 1: 180.0, 2: 172.8, 3: 144.0, 4: 45.0, 5:
22.5, 6: 11.2
No. Page Item Settings Description
FILE menu
No. Page Item Settings Description
01/01 USER FILE USER FILE LOAD EXEC For details, see “Saving and
Recalling User Files” on page
217.
USER FILE SAVE EXEC
F.ID Blank/up to 16
characters
USER PRESET EXEC For details, see “Resetting USER
menu settings to the standard
settings” on page 201.