Filter
Top Products
Setting the Electronic Shutter
68
Chapter 3 Adjustments and Settings for Shooting
To register user-defined settings
You can register up to six shutter angle settings.
If six settings are already registered, you must
delete one of the registered settings before
registering a new one.
1 Rotate the MENU knob to move the b
mark to the DEL position, and then
press the MENU knob.
The b mark changes into a z mark, and the
z mark changes into a ? mark.
Also, a * mark appears before the number.
2 Turn the MENU knob to move the *
mark to the number of the shuttle angle
that you want to change, and then press
the MENU knob.
The selected setting is deleted. The numbers
of settings after the deleted setting are
incremented to bring them up to replace the
deleted setting. (The following example
shows the display after deletion of the setting
“90.0”, which had been registered as setting
number 3.)
3 Turn the MENU knob to move the b
mark to the ADD position, and press the
MENU knob.
The b mark changes into a z mark, and the
z mark changes into a ? mark.
4 Turn the MENU knob to change the
value to the right of the ? mark into the
shutter angle that you want to register,
and then press the MENU knob. (The
setting value can be selected over the
range 360.0 to 4.5.)
The newly specified shutter angle is assigned
to a free slot in the list, and the list is sorted
in order of the setting values. (In the figure
below, the shutter angle “144.0” was added,
and then the list was sorted, so that the angle
“144.0” is registered as item number 3.
To add more user-defined settings
If there is no empty number in the list:
Repeat steps 1 to 4.
If there is an empty number in the list:
Repeat steps 3 and 4.
Deleting unneeded settings
When you are selecting shutter speeds, the
unit skips numbers that do not have assigned
settings. You will be able to select settings
more quickly if you delete settings that you
use only rarely. You must leave at least one
setting, but you can delete settings numbered
2 through 6.
SHUTTER SELECT : DEGREE
ADD: ---.-
DEL:?
DEGREE SECOND
*1: 216.0 1/99.85
2: 180.0 1/119.7
3: 90.0 1/239.0
4: 45.0 1/475.0
5: 22.5 1/940.0
6: 11.2 1/1880
M24
SHUTTER SELECT TOP
SHUTTER SELECT : DEGREE
ADD: ---.-
DEL:
DEGREE SECOND
*1: 216.0 1/99.85
2: 180.0 1/119.7
3: 45.0 1/475.0
4: 22.5 1/940.0
5: 11.2 1/1880
6: ---.- -------
M24
SHUTTER SELECT TOP
SHUTTER SELECT : DEGREE
ADD:?180.0
DEL:
DEGREE SECOND
*1: 216.0 1/99.85
2: 180.0 1/119.7
3: 45.0 1/475.0
4: 22.5 1/940.0
5: 11.2 1/1880
6: ---.- -------
M24
SHUTTER SELECT TOP
SHUTTER SELECT : DEGREE
ADD: ---.-
DEL:
DEGREE SECOND
*1: 216.0 1/99.85
2: 180.0 1/119.7
3: 144.0 1/150.0
4: 45.0 1/475.0
5: 22.5 1/940.0
6: 11.2 1/1880
M24
SHUTTER SELECT TOP