Filter
Top Products
Menu List
171
Chapter 6 Menu Displays and Detailed Settings
11/10 SKIN DETAIL SKIN DETAIL ALL OFF/ON Turns on or off all of channels 1,
2 and 3 for the color detail
function.
SKIN DETECT Moves to color detection
page.
Executes the color detail
function.
SKIN AREA IND OFF/ON Turns on and off the function that
displays a zebra pattern where
color was detected.
[F800]
When this is ON, a zebra pattern
is output from the following
connectors.
• SDI OUT 2 connector (when all
of the following are true: SDI
OUT 2 SELECT on the OUTPUT
1 page is set to HDSDI, SDI OUT
2 SUPER is set to ON, and either
SUPER(MENU) or
SUPER(ZEBRA) on the SUPER
IMPOSE page is set to ON)
• TEST OUT connector (when both
of the following are true: TEST
OUT SUPER on the OUTPUT 1
page is set to ON, and
SUPER(MENU) on the SUPER
IMPOSE page is set to ON)
[700]
When this is ON, a zebra pattern
is output from the TEST OUT
connector (when both of the
following are true: TEST OUT
SUPER on the OUTPUT 1 page
is set to ON, and
SUPER(MENU) on the SUPER
IMPOSE page is set to ON)
SKIN DTL SELECT 1/2/3 Selects the type of the color
detail function. The following
items depend on the selected type
of the color detail function.
SKIN DETAIL OFF/ON Turns the color detail function on
or off for the type selected in the
above item.
SKIN DETAIL LVL (–99 to 99) Sets the level of the color detail
signal.
SKIN DTL SAT (–99 to 99) Adjusts the saturation level of the
hue possessed by the color detail
function.
SKIN DTL HUE 0 to 359 Adjusts the center phase of the
hue possessed by the color detail
function.
SKIN DTL WIDTH 0 to 39 to 359 Adjusts the width of the hue
possessed by the color detail
function.
No. Page Item Settings Description