Filter
Top Products
Transferring clips (Direct FTP function)
146
Chapter 5 Operations in GUI Screens
Note
When the selected range (duration) in the expand
thumbnail screen is less than two seconds, it is
expanded automatically to two seconds.
3 Execute step 2 to 9 of the previous
section “To upload entire clips”.
Proceed as follows to download clips from a
remote host (such as other XDCAM device
devices or a material server).
See page 116 for information about thumbnail screen
operations.
1 Display the Disc Menu.
2 Select Download Clip via Direct FTP,
and then press the SET/S.SEL button or
the MENU knob.
The Select Remote Host screen of the
Download Clip via Direct FTP command
appears.
3 Execute steps 6 to 9 of “To upload entire
clips” (page 142).
If the connection succeeds, the Select Clip to
Download screen appears.
Notes
• If the remote host is a computer, only the MXF
files in the specified directory appear.
• File names containing other than ASCII
characters (kanji and so on) are not displayed.
4 Select a clip to download, and then press
the SET/S.SEL button or the MENU
knob.
The download starts.
When the download finishes, the
Downloading Result Report screen appears.
Select “OK”, and then press the SET/S.SEL
button or the MENU knob. This returns you
to the clip thumbnail screen.
In the field or another environment where the
devices are not connected to a network, you can
copy (upload) clips between XDCAM devices by
connecting them directly. The example in the
following procedure shows how to copy a clip
from this unit to a PDW-HD1500. Insert discs
into both units and proceed as follows.
1 Connect this unit and the PDW-
HD1500 by a network cable.
The cable can be either a cross cable or a
straight cable.
2 Set up the two units as follows.
Settings on this unit
Downloading clips
Copying clips directly between
XDCAM devices
Item Setting
POWER SAVE
page of
OPERATION
menu
ETHERNET/
USB
ENABLE
NETWORK page
of
MAINTENANCE
menu
DHCP ENABLE
UPnP ENABLE
This unit
PDW-HD1500
Network cable
(not supplied)