Filter
Top Products
Menu List
169
Chapter 6 Menu Displays and Detailed Settings
08/07 DETAIL 1 DETAIL OFF/ON Sets the detail correction function
on or off.
APERTURE OFF/ON Turns the aperture correction
function on or off.
DETAIL LEVEL (–99 to 99) Sets the general level of the detail
signal.
APERTURE LEVEL (–99 to 99) Sets the aperture correction level.
DTL H/V RATIO (–99 to 99) Sets the level of the V detail
signal.
CRISPENING (–99 to 99) Sets the crispening level.
LEVEL DEPEND OFF/ON Turns the level depend function
on or off.
LEVEL DEPEND LVL (–99 to 99) Sets the level of the level depend.
DETAIL FREQUENCY (–99 to 99) Sets the frequency of the H detail
signal.
09/08 DETAIL 2 KNEE APERTURE OFF/ON Turns the knee aperture function
on or off.
KNEE APT LVL (–99 to 99) Sets the knee aperture level.
DETAIL LIMIT (–99 to 99) Sets the both detail black and
white limiters.
DTL WHT LMT (–99 to 99) Sets the detail white limiter.
DTL BLK LMT (–99 to 99) Sets the detail black limiter.
DTL V-BLK LMT (–99 to 99) Sets the V detail black limiter.
V DTL CREATION NAM/G/R+G/Y Selects the source signal of the V
DTL signal.
H/V CONTROL MODE H/V /V Selects the operation mode of
DTL H/V RATIO on the
DETAIL 1 page.
H/V: H and V increase and
decrease in inverse
proportion
V: V DTL only enabled
No. Page Item Settings Description