Filter
Top Products
Basic Procedure for Shooting
86
Chapter 4 Shooting
[F800]
Displaying the focus assist indicator in the
viewfinder makes it easier to focus. This is
convenient in situations where it may be difficult
to focus using only the video in the viewfinder.
To display the focus assist indicator
1 Display the FOCUS ASSIST page in the
OPERATION menu.
See “Basic menu operations” (page 193) for
more information about menu operations.
2 Select FOCUS ASSIST IND, and turn
the MENU knob until ON appears.
The focus assist indicator appears.
3 Set the following items as required.
FOCUS INS POS: Select the focus assist
indicator display position from BOTTM
(bottom), LEFT, TOP, and RIGHT.
FOCUS AREA MARK: Turn the display of
the frame around the focus detection
range OFF (hide) or ON (display).
Notes
• The focus indicator is not displayed when the gain is
set to 18 dB or higher.
• When you display the focus assist indicator, the
display of effective pixels (which you select by setting
100% MARKER in the MARKER 1 page of the
OPERATION menu to “ON”) is hidden.
• When you display the frame of the focus detection
range, the box cursor (which you select by setting User
Box in the MARKER 2 page of the OPERATION
menu to “ON”) is hidden.
How to read the focus assist indicator
The “in focus” position is the position where the
bar reaches its maximum length. Focus on a
subject by rotating the focus ring so that the bar
extends to its maximum length.
Note
The focus indicator may show little or no variation when
you are shooting a smooth subject or a dark scene.
Using the Focus Assist function
Focus detection range frame
Focus assist indicator
In focus position: Position
where bar is at maximum
length