Filter
Top Products
Addendum 101
-Window=[
top
],[
left
],[
width
],[
height
]
• This option enables the Display Control application window to be positioned.
• If a number is left out of the list then the value saved when the application was last
terminated is used.
• To change the position of the window without changing the size:
-window=100,200
• To change the size of the window without changing the position:
-window=,,800,600
-AlwaysOnTop={TrueIFalse}
• This sets the Always on Top state of the Display Control application window.
• To enable the window to behave normally, the value should be set to false.
• To force the window to be displayed on top of all other normal windows the value
should be set to true.
• 1 or on can be substituted for true.
• 0 (zero) or off can be substituted for false.
Networking Options
To control a machine other than the one you are working on you will need some of the
following options:
-Machine={
machine name
|
IP address
}
This option specifies the machine to connect to.
• If the machine name contains spaces then enclose the name in quotes, for example:
-machine="My Computer"
• You can also specify an IP address, for example:
-machine=10.0.0.21
• -machine is not compatible with -layout.
If the server requires a User Name and Password the following options should be used:
-UserName=
user name
-Password=
password
If the machine is not participating in a domain, the account must be on the machine you are
connecting to.
If the machine is participating in a domain, you have a choice:
• The account can be on the machine you are connecting to.
• It can be an account on the domain.
If the account is on the domain, the domain name must be specified with the following
option:
-Domain=
domain name
-Port=
port number
You need specify the port if you are attempting to connect to another machine and Display
Control has been configured to listen on a port other than the default port.
A port number is any integer between 1 and 65535 inclusive.