Filter
Top Products
Display Control menu descriptions 33
Connecting the application using an external client
An external client connection is needed when you would like to run the Display Control
Application from a different machine (= external client) over a network.
Therefore you will need to:
1. Install the Display Control Application on the external client by making the selection
below during the installation process (see application installation paragraph)
2. Connect the external client to the Display Control Application over the network. Therefore
proceed as follow:
• Select Connect… from the File menu and the following dialog is displayed:
• Use this dialog to specify which machine is to be controlled using the Display Control
application
3 The machine can be specified by name or by IP address.
3 Select Browse… to locate a machine on the local network.
• Use this dialog to specify the Windows settings:
3 Add existing windows to representation: Displays the open windows.