Filter
Top Products
104 Addendum
Always shows the cursor within the client area of the window
-CursorStyle=
Hide
Always hide the cursor within the client area of the window
-CursorStyle=
HideWhenActive
Only hide the cursor within the client area of the window when the window is the active
window on the desktop.
Networking Options
To control a window on a machine other than the one you are working on you will need
some of the following options:
-Machine={
machine name
|
IP address
}
Use this option to specify the machine to connect to.
-Port=
port number
You need specify the port if you are attempting to control a window on another machine
and the ECU server has been configured to listen on a port other than the default port 1049.
A port number is any integer between 1 and 65535 inclusive.
If the server requires a User Name and Password, the following options should be used:
-UserName=
user name
-Password=
password
If the machine is not participating in a domain, the account must be on the machine you are
connecting to.
If the machine is participating in a domain you have a choice:
• The account can be on the machine you are connecting to.
• It can be an account on the domain.
If the account is on the domain, the domain name must be specified with the following
option:
-Domain=
domain name