Filter
Top Products
Addendum 103
-WindowStyle={BorderAndTitleBar|BorderOnly|NoBorderOrTitleBar}
-DisplayMessageAfter=
time in milliseconds
-CaptureFormat={Automatic|5-5-5|5-6-5|8-8-8}
-TransferData={ViaSystemMemory|DirectToGraphicsCard}
-Scaling={Fast|Slow}
-ActiveCaptureRate=percentage
• Select one of the following percentages: 1, 5, 10, 15, 20, 25, 33, 50 or 100. If you use a
number that is not in the list, it will be rounded down.
-InactiveCaptureRate=
percentage
• Select one of the following percentages: 1, 5, 10, 15, 20, 25, 33, 50, 100. If you use a
number that is not in the list, it will be rounded down.
-DifferentCaptureRate={On|Off}
-Input=
input number
-Reset
• Discards the capture settings for the mode the ECU source is currently generating.
-ShareCaptureSettings={On|Off}
• With ShareCaptureSettings switched on, the changes made to the capture settings con-
trols are shared with other ECU windows. The capture settings are saved automatically
so that the next time a ECU window is created, the capture settings can be used.
• With ShareCaptureSettings switched off, the changes made to the capture settings con-
trols are applied to this ECU window only.
• When switching ShareCaptureSettings on, the capture settings for the ECU window will
be discarded.
• By default, ShareCaptureSettings is switched on.
-Cropping=[{On|Off}],[
top
],[
left
],[
width
],[
height
]
The following command line options allow changes to the appearance of the ECU source.
The numbers correspond to the values displayed on the Input Settings sheet.
-CaptureWidth=
number
-
CaptureHeight
=number
-HorizontalPosition=
number
-HorizontalSize=
number
-Phase=
number
-VerticalPosition=
number
-BlackLevel=
number
-Brightness=
number
-Contrast=
number
-Saturation=
number
-Hue=
number
-Information
Creates a text file called information.ini in the current directory. The file contains details of
the minimum and maximum values and supported features that can be used with the
command line.
The information.ini file is over written every time the –information is used.
-CursorStyle=
Show