Filter
Top Products
56 Display Control menu descriptions
Resolution and Refresh
Cropping
Video Adjustments
Colour Adjustments
Source
The Source control specifies which source is displayed in the window. Select the input from
the drop down list. You can give the inputs meaningful labels in the Configure ECU dialog.
When you change inputs, the Capture Settings controls may change.
See the ECU User Manual for information on the input connections.
Capture Settings
Share these capture settings across all inputs.
With Share these capture settings across all inputs selected, the changes you make to the
capture settings controls will be shared with other inputs of the same type. The capture
settings will also be saved automatically so that the next time a ECU window is created, the
capture settings can be used.
Use these capture settings with this input only.
With Use these capture settings with this input only selected, the changes you make to the
capture settings controls will be applied to this ECU window only.
Reset
The Reset button will discard any changes you have made to the capture settings and
display the source with default settings.
Resolution and Refresh
Width
The width specifies the horizontal resolution of the source.
Height
The height specifies the vertical resolution of the source.
Vertical Refresh
The Vertical Refresh specifies the vertical refresh rate of the captured source.
Cropping