Filter
Top Products
148
Most of the current camera settings can be set under the Mode Dial’s <
l
>
setting.
Set the shooting mode to any mode except <
1
> (Full Auto).
The
camera settings cannot be registered in the <
1
> (Full Auto) mode.
1
Select [Register camera settings].
Turn the <5> dial to select [c
Register camera settings], then
press <0>.
2
Select [OK].
Turn the <5> dial to select [OK],
then press <0>.
X The following camera settings will be
registered under the Mode Dial’s
<l> setting:
Shooting settings
Shooting mode and settings, AF mode, AF point selection, Metering
mode, ISO speed, Drive mode, Exposure compensation, Flash exposure
compensation, White balance
Menu settings
Quality, Beep, Shoot w/o card, AEB, WB SHIFT/BKT, Custom WB, Color
temp., Color space, Picture Style, Review time, AF points, Histogram, Auto
power off, Auto rotate, LCD brightness, File numbering (method), Custom
Functions (C.Fn)
3 Register Camera SettingsN
Even when the Mode Dial is set to the <l> setting, you can still change the
drive mode and menu settings. If you want to include those changes under
the <l> setting, just follow the above procedure.
To view the settings registered under the <l> setting, set the Mode Dial
to the <l> setting and press the <B> button. The registered
settings will be displayed on the LCD monitor.
To revert the <l> setting to the default, select [Clear registered
camera set.] with step 2 explained on page 150. The settings will be
reset to the settings shown on page 37.