Filter
Top Products
26
With AC Adapter Kit ACK-E2 (optional), you can connect the camera to
a household power outlet and not worry about the battery level.
1
Connect the DC Coupler.
Connect the DC Coupler’s plug to the
AC adapter’s socket.
2
Connect the power cord.
Connect the power cord to the AC
adapter.
Insert the plug into a power outlet.
When you are finished, disconnect
the plug from the power outlet.
3
Place the cord in the groove.
Carefully insert the cord into the
groove without damaging it.
4
Insert the DC Coupler.
Open the battery compartment cover
and open the DC Coupler cord notch
cover.
Insert the DC Coupler until the lock
position and put the cord through the
notch.
Close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s <4>
switch is set to <1> or <J>.