Open as PDF
3 Custom Function SettingsN
C.Fn-19 Lens AF stop button function
0: AF stop
1: AF start
AF operates only while the AF stop button is pressed. While the
button is pressed, AF operation with the camera is disabled.
2: AE lock while metering
When the button is pressed while metering is still active, AE lock is
applied. Convenient when you want to focus and meter separately.
3: AF point: M -> Auto / Auto -> ctr
In the manual AF point selection mode, the button instantly
switches to automatic AF point selection from manual AF point
selection only while you hold it down. Convenient when you are no
longer able to focus track a moving subject with a manually-
selected AF point in the AI Servo AF mode. In the automatic AF
point selection mode, the button selects the center AF point only
while you hold it down.
4: ONE SHOT <-> AI SERVO
In the One-Shot AF mode, the button switches to the AI Servo AF
mode only while you hold it down. In the AI Servo AF mode, the button
switches to the One-Shot AF mode only while you hold it down.
Convenient when you need to keep switching between One-Shot AF
and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already ON, the Image Stabilizer operates
only while you press the button.
C.Fn-20 Add original decision data
Data for verifying whether the image is original or not is appended
to the image. When an image appended with the verification data
is played back, the <L> icon will be displayed. (p.108) To verify
whether the image is original, the Data Verification Kit DVK-E2
(optional) is required.
The AF stop button is provided only on super telephoto lenses.