Open as PDF
With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
Photograph a white object.
The plain, white object should fill the
spot metering circle.
Set the lens focus mode switch to
<MF>, then focus manually. (p.80)
Set any white balance setting. (p.61)
Shoot the white object so that a
standard exposure is obtained.
Select [Custom WB].
Turn the <5> dial to select [z
Custom WB], then press <0>.
X The custom white balance screen will
Select the image.
Turn the <5> dial to select the
image captured in step 1, then press
X The image’s white balance data will
be imported and the menu will
Select the custom white balance.
After exiting the menu, press the
Look at the LCD panel and turn the
<5> dial to select <
Custom White BalanceN