Open as PDF
The date/time (back-up) battery maintains the camera’s date and time.
The battery’s service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
Turn the <4> switch to <2>.
Unscrew the battery holder
Use a small Philips screwdriver.
Be careful not to lose the screw.
Take off the battery holder.
Push out the battery in direction 2.
Replace the battery in the battery
Make sure the battery is in the proper
+ – orientation.
Tighten the battery holder screw.
Replacing the Date/Time Battery
For the date/time battery, be sure to use a CR2016 lithium battery.