Filter
Top Products
25
Installing and Removing the Battery
Battery Life
The figures above are based on a fully-charged BP-511A and CIPA (Camera &
Imaging Products Association) testing criteria.
1
Open the battery compartment
cover.
Slide the lever as shown by the arrow
and open the cover.
2
Remove the battery.
Slide the battery lock lever as shown
by the arrow and remove the battery.
Temperature Shots remaining
At 20°C / 68°F Approx. 800
At 0°C / 32°F Approx. 400
Removing the Battery
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
Pressing the shutter button halfway for long periods or operating the
autofocus only can reduce the number of possible shots.
The number of possible shots with the BP-514 is the same as indicated
in the table.
The number of possible shots with the BP-511 or BP-512 will be about
75% of the figures in the table for 20°C. At 0°C, the figures will be about
the same as in the table.