Filter
Top Products
122 Chapter 11
Routine Maintenance
Cleaning the Platen Glass and Document Cover
Wipe the Platen Glass (A), the FAU Protective Sheet (white area) (B), and the FAU Lamp (C)
with a clean, soft, lint-free cloth moistened with water. Then wipe with a clean, soft, dry, lint-free
cloth making sure not to leave any residue, especially on the Platen Glass. If you have trouble
getting the scanning area clean, wipe with diluted mild detergent (for dish washing).
Cleaning the Roller (Roller Cleaning)
Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wear
the rollers, so perform this only when necessary.
1 Press [ON/OFF] to turn on the machine, then remove any paper from the Auto
Sheet Feeder and Cassette.
See “Turning on the Machine” on page 18.
2 Use [Feed Switch] to select the paper source to clean.
3 Clean the paper feed rollers.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 115.
(2) Use [ ] or [ ] to select <Roller cleaning>, then press [OK].
The confirmation screen is displayed.
Important
The sheet (B) is easily damaged, so wipe it gently.
Note
Ensure that the Inner Cover is closed.
(A)
(B)
(C)
(2)