Filter
Top Products
Chapter 1 19
Before Printing
The Screen-saver Mode
The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the
display. You cannot change the period before the LCD goes out.
Loading Documents to Copy or Scan
This section describes how to load the document on the Platen Glass.
Document Requirements
The documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Loading Documents
Load documents that you want to copy or scan on the Platen Glass. For how to load a photo,
see “Scanning a Photo” on page 65. For how to load a film, see “Scanning a Film” on page 67.
1 Lift the Document Cover.
2 Load your document on the Platen Glass.
z Place your document face down on the Platen Glass.
z Align the upper left corner of your document with the alignment mark on the upper left
corner of the Platen Glass.
Document
type
z Documents
z Photographs
z Book
* For details on positive and negative 35 mm film strip and 35 mm slides, see “Photo
Printing from Photo or Film” on page 65.
Size (W x L)
Max. 8.5" x 11.7" / 216 x 297 mm
Thickness
Max. 0.8" / 20 mm
Note
Make sure any glue, ink, correction fluid, or the like is completely dry before loading the
document on the Platen Glass.