Filter
Top Products
Chapter 2 41
Copying
(3) Press [Color] for color copying, or [Black] for black & white copying.
The machine starts copying.
Reducing or Enlarging a Copy
You can reduce or enlarge copies.
1 Prepare for copying.
See “Prepare for copying.” on page 40.
2 Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25-400%)>.
(1) Press [Settings].
(2) Use [ ] or [ ] to select Tab 1.
(3) Use [ ] or [ ] to select <Magnification>, and use [ ] or [ ] to select <Zoom (25-
400%)>.
Specify the custom copy ratio for reducing or enlarging copies.
Besides <Zoom (25-400%)>, you can also choose from the following reduction/
enlargement methods.
(4) Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value.
Holding down [ ] or [ ] steps through the values faster.
3 Finalize your selection.
(1) Press [Settings].
Return to the Copy standby screen.
4 Start copying.
See “Start copying.” on page 40.
Note
To cancel copying, press [Stop/Reset].
Same magnification: Copies in the same size as an original.
Preset ratio: Preset ratios are convenient when changing between standard page sizes,
for example, when reducing A4 to A5, or enlarging B5 to A4.
Fit-to-page: You can automatically reduce or enlarge the document to fit the size of the
paper which are loaded in the Auto Sheet Feeder or Cassette.
Note
When you choose <Fit-to-page>, the document size may not be detected correctly depending
on the document. In that case, choose <Same magnification>, <Preset ratio> or <Zoom (25-
400%)>.
(3)