Microsoft 702 Photo Scanner User Manual


 
Microsoft Picture It! Companion Guide
Chapter 2: Making the Most of Your Camera
18
For serious camera users, the manual SLR cameras were usually the best
option, since they offered so much control. The creative process was not left to
the automatic settings of a camera. Automatic point-and-shoot cameras were
good for novice photographers who didnt want to worry about setting the
camera controls. Many automatic cameras could produce adequate or even
excellent photos without requiring knowledge of advanced photography
concepts.
While you can still find fully automatic and fully manual cameras, many of
todays cameras offer different modes for different degrees of automatic and
manual control. For example, some SLR film cameras let you switch to an
automatic mode where the camera determines everything from focusing to
setting the aperture. Many compact digital cameras are designed to be used
primarily in automatic mode, but also allow you to switch to program and
manual modes to control exposure settings, like shutter speed and aperture.
With digital cameras, the adjustments that you make are often digital approxi-
mations of the equivalent function in film cameras, as with shutter speed or
ISO. But the photographic result is the same. The following sections provide an
overview of the most important manual camera settings and concepts.
Exposure
Exposure describes the amount of light that comes into your camera when you
take a photo. Setting the camera to the correct exposure is crucial to getting the
proper tones and colors in your photos. Overexposure occurs when too much light
has reached the image sensor (or film in a film camera), which decreases detail
and causes the photo to look washed out. Underexposure occurs when insuffi-
cient light has been let into the camera, and the photo looks dim and murky.
Exposure is controlled by three factors: the aperture, the shutter speed, and the
ISO rating. Aperture is the size of the opening that lets light into the camera.
Shutter speed is how long light is allowed into the camera. ISO rating (the film
speed in a film camera) is the sensor or films sensitivity to light.